Panasonic DP-3510

589
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
b. A hole is punched in the trailing edge of the second sheet.
Fig. 4-010
When two holes are punched, the 3-Hole Puncher is fed reciprocally in the escape direction (hole
puncher rise direction) as shown below.
Fig. 4-011
[punch shaft
stopped/home
position]
[punch shaft is
rotated 90° in the
reverse direction/
hole punched]
[punch shaft is rotated
180° in the reverse
direction/punch
operation completed]
[punch shaft
stopped/home
position]
[punch shaft is
rotated 90° in the
reverse direction/
hole puncher rises
to topmost position]
[punch shaft is rotated
180° in the reverse
direction/hole puncher
returns to original
position]