59
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(22) Remove 4 Screws (F10).
(23) Remove the PNL3 PC Board (313).
(24) Remove 2 Screws (H4).
(25) Remove 2 Screws (H4).
(26) Remove the LCD Module (328).
(27) Remove the Touch Panel (327).
Note:
Reinstall the Battery Holder after reassembling the
Lower Control Panel Cover.