Panasonic DP-3510

595
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
5. Removing the Tray Rack Assembly.
Fig. 5-006
(1) Remove the Rear Cover. (See Fig. 5-003.)
(2) Remove the Rear Lower Cover also.
(See Fig. 5-031.)
(3) Disconnect the J201 [1] Connector, Ground Wire
[2], and release the Harness Stop [3].
Fig. 5-007
(4) Remove the Slide Guide [4].
(5) Remove the End Cap (F) [5] and End Cap (R)
[6].
(6) Carefully lift the Tray Rack Assembly [7] to
remove.
Fig. 5-008
Caution:
When reinstalling the Tray Rack Assembly back
into the Finisher Assembly, before inserting it, be
sure to release the Tray Lift Motor Gear Clutch [1]
with a Screwdriver or a similar object. Take extra
care during this operation.
[1]
[3]
[2]
[6]
[4]
[7]
[5]
[1]