607
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Fig. 5-040
(12) Remove 2 Screws [6], and remove the Saddle
Stitch Unit [7] by moving it in the upward
direction.
Fig. 5-041
Caution:
When removing the Saddle Unit from the Finisher
Unit Body, prevent the Timing Belt [8] from
catching on the Communications Cable Bracket
[9].
[6]
[6]
[7]
[8]
[9]
To Next Page
Loading...
