611
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
5. Adjusting the Stitcher Position.
Fig. 5-053
(1) Remove the Front Lower Door. (See Fig. 5-030.)
(2) Remove the Front Inside Cover.
(See Fig. 5-032.)
(3) Open the Front Door Assembly.
(4) Pull out the Saddle Stitch Mount Unit to the front,
then pull out the Saddle Stitch towards you and
then pull the Saddle Stitch down.
(5) Remove 3 Screws [1], and remove the Saddle
Stitch Mount Unit Cover [2].
Fig. 5-054
(6) Remove the Saddle Stitch Positioning Tool [3]
from the back of the Cover.
Fig. 5-055
(7) If you must adjust the Front Saddle Stitch,
remove the Center Guide Plate [5] and Front
Guide Plate [4] (one screw each). If you must
adjust the Rear Saddle Stitch, remove the
Center Guide Plate [5] and the Rear Guide Plate
[6] (one screw each).
Fig. 5-056
(8) If you must adjust the Front Saddle Stitch, loosen
2 Screws [8] on the Saddle Stitch Mount [7].
If you must adjust the Rear Saddle Stitch, loosen
2 Screws [9].
[1]
[2]
[3]
[4][5][6]
[8]
[7]
[9]
To Next Page
Loading...
