Panasonic DP-3510

693
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(4) Disconnect the Sensor Connector.
(5) Remove the Sensor Harness from the Harness
Clamp.
(6) Remove the Upper Guide Plate for the Inverting
Paper Exit (4 Screws).
(7) Remove the Inverting Guide Plate (4 Screws).
(8) Remove the Tension Spring.
(2 positions, Front/Rear).
Note:
Use the upper hole when the Spring is reinstalled.
(9) Remove the Gear and Bushing
(Front/Rear, 1 E-Ring each).
(10) Remove the Paddle Roller.
(6
)
(5)
(6)
(4)
(7
)
(7)
(8
)
(8)
(9)
(10)