Panasonic DP-3510

719
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
2. Punch Unit (Option)
Table 1-002
Item Description Remarks
Punching Method Reciprocating method
(sequential processing method)
Paper Size 2- / 3-hole (Punch Unit DA-SP41-PU) :
2-hole / LGL, LTR-R
3-hole / LDR, LTR
For USA and Canada
4-hole (Punch Unit DA-SP41-PB) :
A3, A4
For EU and Other
Destinations
Paper Weight
64 g/m
2
~ 133 g/m
2
No transparencies.
Punch Hole Diameter 2-/3-hole (Punch Unit DA-SP41-PU) :
2-hole 0.31 in / 8.0 mm
3-hole 0.31 in / 8.0 mm
For USA and Canada
4-hole (Punch Unit DA-SP41-PB) :
0.26 in / 6.5 mm
For EU and Other
Destinations
Punch Waste 2-/3-hole (Punch Unit DA-SP41-PU) :
2-hole / 1500 sheets
3-hole / 1500 sheets
For USA and Canada
4-hole (Punch Unit DA-SP41-PB) :
1500 sheets
For EU and Other
Destinations
Size (W x D x H) 3.54 x 22.05 x 6.69 in
(90 x 560 x 170 mm)
Weight 5.5 lb (2.5 kg) (approx.)
Power Supply 24 VDC / 5 VDC supplied by the Finisher Unit.
Maximum Power
Consumption
Standby : 2 W max.
Operating : 21 W max. (punching)
Manual Stapling None
Folding Method Roller contact
Folding Mode Double-folding (single-sheet non-stapling available)
Folding Position Center of sheet Requires a margin of ± 0.2
1n (± 5 mm) in the center of
the sheet for a middle
margin.
Saddling Size A3, A4-R, B4, LDR, LTR-R No special paper.