Panasonic DP-3510 - Page 794

794
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
11.3.3.2. Punch Unit (Option)
11.3.3.2.1. Puncher Driving System
Fig. 3-077
1-1. Removing the Punch Motor
(1) Remove 2 Screws [1].
(2) Disconnect the Connector [2] to remove the
Punch Motor [3].
Fig. 3-078
1-2. Removing the Horizontal Registration Motor
(1) Disconnect Connector J1001 [1].
(2) Remove the Harness [3] from the Harness Guide
[2].
(3) Remove 2 Screws [4] to remove the Horizontal
Registration Motor [5].
Fig. 3-079
1-3. Removing the Punch Unit
(1) Remove the Waste Case.
(2) Remove 1 Screw [1] to detach the Jam
Processing Cover [2].
Fig. 3-080
(3) Disconnect the Connector J1005 [3].
(4) Remove the Harness [5] from the Harness Guide
[4].
[2]
[1]
[3]
[4]
[3]
[1]
[2]
[5]
[1]
[2]
[3]
[5]
[4]