Panasonic DP-3510 - Page 821

821
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
11.3.5.5. Self Diagnosis
11.3.5.5.1. Alarm
1. Finisher / Saddle Unit
Table 5-034
Error Condition
Timing of
Detection
Operation Resetting
Stapler Absent The stapler is not
set.
Monitored at all
times
The staple / fold
motor (M7) and the
slide motor (M8)
will stop.
Set the stapler.
Stapler Absent The staple
cartridge has run
out of staples.
Monitored at all
times
Normal operation
will continue;
however, operation
is subject to
instructions from
the host machine.
Replace the staple
cartridge; or, set it
correctly.
Mixed Sheets Sheets of different
sizes are deposited
in the
compartment.
When a sheet of a
different size is
placed.
The sheet will be
aligned based on
maximum size
width and delivered
as a stack.
—
Overstacking
for Stapling
The number of
sheets in the
compartment has
exceeded the limit
imposed on
stapling.
When an extra
sheet is placed.
The sheets will be
delivered with
stapling.
—
Stack Tray
Overstacking
The number of
sheets deposited
on the delivery tray
has exceeded the
limit imposed on
the tray. (sheets,
sets)
When an extra
sheet is placed.
Normal operation
will continue.
Remove the sheets
from the delivery
tray.
Saddle
Overstacking
Remove the stack
from the bind tray.
More than 10
stacks are
deposited on the
folded stack tray.
When an extra
sheet is placed.
Normal operation
will continue.
Remove the stack
from the bind tray.