Panasonic DP-3510

823
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
11.3.6. Appendix
11.3.6.1. Signals and Abbreviations
The following presents the abbreviations of signals used in this manual and in drawings, and the meaning of
each signal.
Reference:
Signals enclosed by brackets [ ] are electrical signals.
Finisher / Saddle-Stitch Unit
ADJ_TRAY_S Jog Tray Paper Detect Signal
B_CLU Bind Clutch Drive Signal
BDL_ROL_HP Swing Guide HP Detect Signal
BIND_CLK Staple/Fold Motor Clock Detect Signal
BIND_EMPS Bind Tray Paper Detect Signal
BIND_HP Folding HP Detect Signal
BIND_L Fold Position LED ON Signal
BINDMTR Staple/Fold Motor Drive Signal
BIND_P Fold Position Paper Detect Signal
BIND_ROL_HP Bundle Feed Roller HP Detect Signal
EJCT_BLT_HP Eject Belt HP Detect Signal
EJCTMTR Eject Motor Drive Signal
ENT_S Inlet Paper Detect Signal
FDOOR_S Front Door Open Detect Signal
FEEDMTR Feed Motor Drive Signal
FJOG_HP Front Jog Plate HP Detect Signal
FJOGMTR Front Jog Motor Drive Signal
FRONT_SW Front Door Switch Signal
HOOK_S Hook Empty Detect Signal
JOINT_SW Joint Switch Signal
LVL_S Paper Surface Detect Signal
PAPER_F Paper Full Detect Signal
PDL_HP Paddle HP Detect Signal
PDLMTR Paddle Motor Drive Signal
RJOG_HP Rear Jog Plate HP Detect Signal
RJOGMTR Rear Jog Motor Drive Signal
SELF_P Hook Top Position Detect Signal
SIFT_CLK Sift Motor Clock Detect Signal
SIFT_DNLMT Sift Down Limit Detect Signal
SIFTMTR Sift Motor Drive Signal
SIFT_UPLMT Sift Upper Limit Detect Signal
SLID_HP Slide HP Detect Signal
SLIDMTR Slide Motor Drive Signal
STPL_CNCT Stapler Connect Detect Signal
STPL_HP Staple HP Detect Signal
STPLSAFE_SW Staple Safety Switch Signal
TOPCOV_S Top Cover Open Detect Signal
TRY_EMPS Tray Paper Detect Signal