Panasonic DP-3510 - Configure PS Driver Security Utility (Windows); User and Department Code Setup (Windows)

83
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(35) Remove 5 Tension Springs (2219).
(36) Remove 5 Upper Separators (2227).
(37) Remove 1 Screws (36).
(38) Remove 1 Screw (K2).
(39) Remove the Rear Fuser Cover (2031).
(40) Remove 2 Screws (16).
(41) Remove 2 Fuser Lamps (2027, 2028).
Note:
1. Do not touch the glass portion of the Fuser
Lamps with bare hands. Grease from finger
prints will shorten its life cycle, use isopropyl
alcohol to clean finger prints.
2. When reinstalling, install the longer harness
toward the rear side.