Panasonic HL-G1 Series - Format; All Outputs Read

Normal response data
FORMAT
ᵑᴾ
All Outputs Read
The following special command formats are used to read all measurement
value, received light intensity, and judgment output conditions together.
Request communication data
Normal response data
Reading all “logic” outputs of judgment output selection for sensor 01 in the
RS-422 handshake mode or the RS-485 multi-mode.
Request communication data
Ex
ᴾ
% $ R M B
s
Sender no. Command
BCC
CR
9 5 0 0 0
Measured value: 1
-character
symbol + 7
-character integral
part (no zero suppress)
BCC
% # R M B
CR
Destination no. Command
(4)(3)
0100
(2)(1)
32
Light intensity:
4
-character integral part
(no zero suppress)
Output status
(1): OUT1 0or1
(2): OUT2 0or1
(3): OUT3 0or1
(4): ALARM 0or1
% 0 4 $ W H A
CR
**
% 0 1 # R M B
CR
**
Ramco Innovations
(
800
)
280-6933 www.panasonicsensors.com nsales
@
ramcoi.com