Panasonic HL-G1 Series - Sensor Head Specifications

6-1 Sensor Head Specifications
ƔDiffuse reflection Type
Model No.
Standard
Type
HL-G103-A-
C5
HL-G105-A-
C5
HL-G108-A-
C5
HL-G112-A-
C5
HL-G125-A-
C5
High-func
tion Type
HL-G103-S-J HL-G105-S-J HL-G108-S-J HL-G112-S-J HL-G125-S-J
Supply voltage
24 VDC ±10% including ripple 0.5 V (P-P)
Current consumption
100 mA max.
Measurement method
Diffuse reflection
Measurement center
distance
30 mm 50 mm 85 mm 120 mm 250 mm
Measurement range
±4 mm ±10 mm ±20 mm ±60 mm ±150 mm
Beam source
Red semiconductor laser Class 2 (JIS/IEC/GB/FDA laser notice No. 50)
Max output: 1 mW, Emission peak wavelength: 655 nm
Beam diameter (
*1
)
0.1×0.1 mm 0.5×1 mm 0.75×1.25 mm 1.0×1.5 mm 1.75×3.5 mm
Beam receiving
element
CMOS image sensor
Resolution
0.5 ȝP ȝP ȝP ȝP 20 ȝP
Linearity
±0.1% F.S. ±0.3% F.S.
Temperature
characteristics
±0.08% F.S./°C
Sampling cycle
ȝVȝVPVPV
Analog
output
Voltage
Output range: 0 to 10.5 V (normal), 11 V (at alarm)
Output impedance: 100
:
Current
Output range: 3.2 to 20.8 mA (normal), 21.6 mA (at alarm)
Load impedance: 300
:
max.
OUT1
OUT2
OUT3
Judgment output or alarm output (switchable)
NPN open-collector transistor/PNP open-collector transistor (switchable)
<Settings for NPN>
Peak in-flow current: 50 mA
Applied voltage: 3 to 24 VDC (between
output and 0 V)
Residual voltage: 2 V max. (at in-flow
current of 50 mA)
Leak current
䠖
0.1mA or less
<Settings for PNP>
Peak out-flow current: 50 mA
Residual voltage: 2.8 V max. (at
in-flow current of 50 mA)
Leak current
䠖
0.1mA or less
Output operation
Open when the output is ON.
Short-circuit
protection
Incorporated (Auto-reset)
NP switching input
At 0 V: NPN open-collector output
At supply voltage of 24 VDC: PNP open-collector output
Ramco Innovations
(
800
)
280-6933 www.panasonicsensors.com nsales
@
ramcoi.com