Panasonic HL-G1 Series - 4-3 Command List; Basic Settings; Data Processing Settings

4-3 Command List
 Basic Settings
Item Command Data Description Format
Basic Settings
Sampling
Cycle
RSP WSP
+00000 200 >ȝV@
FORMAT
ᵏᴾ
+00001 500 >ȝV@
+00002 1[ms]
+00003 2 [ms]
Shutter Time
RFB WFB
+00000 to
+00031
+00000: Auto
+00001 to +00031: Fixed
*1. The data section consists of 5 digits (zero suppress is omitted) indicated in
decimal.
 Data Processing Settings
Item Command Data Description Format
Data Processing Settings
Average Times
RAV WAV
+00000 Once
FORMAT
ᵏᴾ
+00001 4 times
+00002 16 times
+00003 64 times
+00004 256 times
+00005 1024 times
Analysis Mode
RHM WHM
+00000 Normal measurement
+00001 Peak measurement
+00002 Valley measurement
+00003
Peak-to-peak
measurement
Zero Set
RZS WZS
+00000 OFF
+00001 ON
Zero Set
Amount
RZV
䠉
-9500000 to
+9500000
-950.0000 to +950.0000
[mm]
FORMAT
ᵐᴾ
Span
RMK WMK
+01000 to
+99999
+0.1000 to +9.9999
FORMAT
ᵏᴾ
Offset
RML WML
-9500000 to
+9500000
-950.0000 to +950.0000
[mm]
FORMAT
ᵐᴾ
*1. The data section consists of 5 digits (zero suppress is omitted) indicated in
decimal.
Ramco Innovations
(
800
)
280-6933 www.panasonicsensors.com nsales
@
ramcoi.com