Panasonic HL-G1 Series - Save

 Save㻌
㻌
There is a difference in setting saving method between the operation of the
panel and the use of the communications command.
ƔSetting Changes in Control Panel of Sensor Head
Press the [ENTER] key and save the change in each item.
When the system is turned ON again, the last saved settings will be reflected.
Ɣ6HWWLQJ&KDQJHVRYHU56&RPPXQLFDWLRQ+LJK-function
type only: E.g., communications command, dedicated console (sold
separately), and Setting and Monitoring Software HL-G1SMI)
Be sure to execute "Save" to maintain setting changes after the system is turned
ON again.
The timing input state cannot be saved. Timing input will be OFF right after the
system is turned ON or a memory change is made.
㻌
Ɣ6DYLQJLQSXWRYHUWKHPXOWL-input (MI) line
Multi-input can be entered for a certain period to save settings made.
For details,
㻌
refer to "2-1 Functions and Arrangements of I/O Terminal
%ORFN".
Ramco Innovations
(
800
)
280-6933 www.panasonicsensors.com nsales
@
ramcoi.com