Panasonic HL-G1 Series - Output Settings

 Output Settings
Item Command Data Description Format
Output Settings
Judgment Output
Selection
ROD WOD
+00000 Logic
FORMAT
ᵏᴾ
+00001 Independent
+00002 2-state
+00003 3-state
Displacement
Judgment
Threshold
a
RHA WHA
-9500000 to
+9500000
-950.0000 to
+950.0000 [mm]
FORMAT
ᵐᴾ
Threshold
b
RHB WHB
-9500000 to
+9500000
-950.0000 to
+950.0000 [mm]
Hysteresis
RHH WHH
+0000000 to
+9500000
+000.0000 to
+950.0000[mm]
Judgment Output
OFF-delay
ROF WOF
+00000 OFF
FORMAT
ᵏᴾ
+00001 2[ms]
+00002 4[ms]
+00003 10[ms]
+00004 20[ms]
+00005 40[ms]
+00006 100[ms]
+00007 Hold
Measurement Value
Display on Panel
㻌
RDS WDS
+00000 FULL
+00001 SET 1
+00002 SET 2
*1. The data section consists of 5 digits (zero suppress is omitted) indicated in
decimal.
Ramco Innovations
(
800
)
280-6933 www.panasonicsensors.com nsales
@
ramcoi.com