Panasonic HL-G1 Series - Page 122

Buffering Operation
RBS WBS
+00000 Stop
FORMAT
ᵏᴾ
+00001 Start
Status Readout
RTS -
+00000 Non-buffering
+00001 Wait for Trigger
+00002 Accumulating
+00003
Accumulation
Completed
Last Data Point
RLD -
+00001 to
+03000
+00001 to accumulated
amount
Data Read (Normal)
RLA -
-
5-character head point +
5-character end point
Data point within the
range from the head data
point to the end data
point is specified.
FORMAT
ᵒᴾ
Data Read
(Difference)
RLB -
-
5-character head point +
5-character end point
Data point within the
range from the head data
point to the end data
point is specified.
FORMAT
ᵓᴾ
Data Read (Binary)
RLC -
-
5-character head point +
5-character end point
Data point within the
range from the head data
point to the end data
point is specified.
FORMAT
ᵔᴾ
*1. The data section consists of 5 digits (zero suppress is omitted) indicated in
decimal.
Ramco Innovations
(
800
)
280-6933 www.panasonicsensors.com nsales
@
ramcoi.com