Panasonic KX-NCP500 - Page 1000

2.2.6 Manager Features
Message Waiting
• 3.23 [1-1] Slot—Card Property - Extension Type—
SLT Power Supply (KX-TDE series only)
• 4.9 [2-6-1] Numbering Plan
—Main—Features—
Message Waiting Set / Cancel / Call Back
• 4.11 [2-6-3] Numbering Plan
—B/NA DND Call Feature—
Message Waiting Set
• 4.18 [2-9] System Options
– Option 3— Dial Tone—Distinctive Dial Tone
– Option 5— SLT—Message Waiting Lamp Pattern (KX-TDE series only)
• 5.22 [3-8-1] VM(DTMF) Group—System Settings— VM DTMF Command—Listening Message
• 6.1 [4-1-1] Wired Extension—Extension Settings
—Option 8—
SLT MW Mode (KX-TDE series only)
• 6.5 [4-1-4] Wired Extension—Flexible Button
—
Type
• 6.13 [4-2-3] Portable Station—Flexible Button
—
Type
• 6.17 [4-3] DSS Console— Type
Feature Guide References
1.19.1 Message Waiting
Multiple Subscriber Number (MSN) Ringing Service
• 12.2 [10-2] DIL Table & Port Settings—DDI / DID / TIE / MSN
–
Distribution Method
– DDI/DID/TIE/MSN—Remove Digit
– DDI/DID/TIE/MSN—Additional Dial
• 12.6 [10-4] MSN Table
Feature Guide References
1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
Music on Hold
• 4.4 [2-2] Operator & BGM
• 4.20 [2-11-1] Audio Gain—Paging/MOH
– MOH—MOH (Music On Hold) (for KX-NCP series)/MOH 1 (Music On Hold 1) (for KX-TDE series)
– MOH—MOH 2 (Music On Hold 2) (KX-TDE series only)
Feature Guide References
1.13.4 Music on Hold
Network Direct Station Selection (NDSS)
• 3.33 [1-1] Slot—Port Property - BRI Port—ISDN CO— Networking Data Transfer
• 3.35 [1-1] Slot—Port Property - PRI Port—CO Setting— Networking Data Transfer
• 4.12 [2-7-1] Class of Service—COS Settings—Manager
—
Manager
• 6.5 [4-1-4] Wired Extension—Flexible Button
– Type
– Dial (for NDSS)
• 6.8 [4-1-6] Wired Extension—NDSS Link Data - Send
• 6.13 [4-2-3] Portable Station—Flexible Button
–
Type
– Dial (for NDSS)
• 6.15 [4-2-4] Portable Station—NDSS Link Data - Send
• 6.17 [4-3] DSS Console
1000 PC Programming Manual
Feature Programming References