10.6 [8-5] Carrier
Carrier
It is possible to specify how user-dialled numbers are modified for connecting to the appropriate carrier. A
maximum of 10 (with the KX-NCP500
/KX-NCP1000/KX-TDE100/KX-TDE200) or 48 (with the KX-TDE600)
different carriers can be programmed to be used with the ARS feature.
Carrier Name
Specifies the carrier name.
Value Range
Max. 20 characters
Maintenance Console Location
10.6 [8-5] Carrier
Programming Manual References
None
Feature Guide References
1.10.1 Automatic Route Selection (ARS)
Removed Number of Digits
Specifies the number of leading digits to remove from the user-dialled number.
Value Range
0–15
Maintenance Console Location
10.6 [8-5] Carrier
Programming Manual References
None
Feature Guide References
1.10.1 Automatic Route Selection (ARS)
Modify Command
Specifies
the commands to modify the user-dialled number to access the carrier. For details of each command,
see the Feature Guide.
874 PC Programming Manual
10.6 [8-5] Carrier
To Next Page
Loading...
