Panasonic KX-NCP500 - 1-1] Slot-Port Property - EM Port (KX-TDE Series Only)

3.47 [1-1] Slot—Port Property - EM Port (KX-TDE
series only)
Various settings can be programmed for each E
& M channel.
To change the status of channels, click Command.
Shelf (KX-TDE600 only)
Indicates the shelf position (reference only).
Value Range
Shelf number
Maintenance Console Location
3.47 [1-1] Slot—Port Property - EM Port (KX-TDE series only)
Programming Manual References
None
Feature Guide References
None
Slot
Indicates the slot position (reference only).
Value Range
Slot number
Maintenance Console Location
3.47 [1-1] Slot—Port Property - EM Port (KX-TDE series only)
Programming Manual References
None
Feature Guide References
None
CH
Indicates the channel number (reference only).
Value Range
Channel number
PC Programming Manual 405
3.47 [1-1] Slot—Port Property - EM Port (KX-TDE series only)