Panasonic KX-NCP500 - KX-TDE100;KX-TDE200 PMMPR Software File Version 3.0 Xxx

14.1.5 KX-TDE100/KX-TDE200 PMMPR Software File Version
3.0xxx
New Contents
• 1.2.1 Installing and Starting the Maintenance Console
PBX Web Manager
• 2.6.17 Utility—CS Status Monitor
• 2.6.19 Utility—File Transfer FTP to IP Equipment—IP-CS/NT400
• 3.1 [1-1] Slot
To access IP-PT port properties
• 3.20 [1-1] Slot—Card Property - Virtual IPCS
• 3.21 [1-1] Slot—Port Property - Virtual IPCS
• 3.22 [1-1] Slot—Port Property - Virtual IPCS—Connection Command
• 3.24 [1-1] Slot—Port Property - Extension Port—
DPT Type—Air Sync Group No
• 3.27 [1-1] Slot—Port Property - CSI/F Port (KX-TDE series only)—
Air Sync Group No
• 4.4 [2-2] Operator & BGM
→ BGM and Music on Hold—
Music Source of BGM2–7 (for KX-NCP series)/Music Source of BGM3–
8 (for KX-TDE series)—OGM No.
→
BGM and Music on Hold—
Music Source of BGM2–7 (for KX-NCP series)/Music Source of BGM3–
8 (for KX-TDE series)—Card
• 4.5 [2-3] Timers & Counters—
Air Synchronisation—Watching Degeneracy
• 5.27 [3-10] Conference Group— Broadcast Mode
• 7.5 [5-3-3] Voice Message—SVM
• 13.6 [11-5] Air Synchronisation
Changed Contents
• 1.2.1 Installing and Starting the Maintenance Console
Starting the Maintenance Console and Assigning the Basic Items (Quick Setup)
• 2.2.5 Programme launcher
—Connect—LAN
• 2.6.1 Utility—Diagnosis
• 2.6.6 Utility—Message File Transfer PC to PBX
• 2.6.7 Utility—Message File Transfer PBX to PC
968 PC Programming Manual
14.1.5 KX-TDE100/KX-TDE200 PMMPR Software File Version 3.0xxx