14.1.2  KX-NCP500/KX-NCP1000 PBMPR Software File Version
4.1xxx
New Contents
• 2.6.20  Utility—File Transfer FTP to IP Equipment—NT3xx
• 4.12  [2-7-1] Class of Service—COS Settings—Assistant— Automatic Answer (Caller)
• 4.12  [2-7-1] Class of Service—COS Settings—CA
• 4.18  [2-9] System Options
→ Option 2—
CO - CO Call Limitation—After Conference
→ Option 4— Send CLIP of Extension Caller—when call is forwarded to CO
→ Option 5— ISDN Option—Calling Party Name Presentation to PRI23
→ Option 5— ISDN Option—Calling Party Name Sending Format
→ Option 6 (CTI)— CTI Hold—Forced Idle when Hold by PDN/SDN Key
• 5.20  [3-7-2] VM(DPT) Group—Unit Settings—Centralised VM Unit Setting
• 5.27  [3-10] Conference Group
Changed Contents
• 3.1  [1-1] Slot
Maximum number of cards
• 3.4  [1-1] Slot—Card Property - IPCMPR (for KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200)/
IPCEMPR (for KX-TDE600)—VoIP-DSP Option—
IP Extension Count of BGM
• 3.11  [1-1] Slot—Shelf Property - Virtual IP Gateway—GW Settings
• 3.12  [1-1] Slot—Shelf Property - Virtual IP Gateway—DN2IP
• 4.12  [2-7-1] Class of Service—COS Settings—Assistant—
Transfer to busy Extension w/o BSS
Operation
• 4.18  [2-9] System Options—Option 4
→
Send CLIP of CO Caller—when call is transferred to CO (CLIP of Held Party)
→ Send CLIP of CO Caller—when call is forwarded to CO
• 6.1  [4-1-1] Wired Extension—Extension Settings
—FWD / DND
• 6.5  [4-1-4] Wired Extension—Flexible Button
PDF Output
• 6.5  [4-1-4] Wired Extension—Flexible Button—Display Option—Key Setting—
Extension Number (for
Voice Mail Transfer)
• 6.10  [4-2-1] Portable Station—Extension Settings
—FWD / DND Reference
• 6.17  [4-3] DSS Console
964 PC Programming Manual
14.1.2 KX-NCP500/KX-NCP1000 PBMPR Software File Version 4.1xxx