Panasonic KX-NCP500 - 1-1] Slot-Port Property - E1 Port-Connection Command

3.45 [1-1] Slot—Port
Property - E1 Port—Connection
Command
Commands for the E1 channels can be programmed.
INS
Puts the channel in service.
Value Range
Not applicable.
Maintenance Console Location
3.45 [1-1] Slot—Port Property - E1 Port—Connection Command
Programming Manual References
3.44 [1-1] Slot—Port Property - E1 Port
Feature Guide References
None
OUS
Takes the channel out of service. This enables a temporary non-use of the channel, for example, for the
purpose of repair.
Value Range
Not applicable.
Maintenance Console Location
3.45 [1-1] Slot—Port Property - E1 Port—Connection Command
Programming Manual References
3.44 [1-1] Slot—Port Property - E1 Port
Feature Guide References
None
PC Programming Manual 395
3.45 [1-1] Slot—Port Property - E1 Port—Connection Command