Panasonic KX-NCP500 Programming Manual

3.23 [1-1] Slot—Card Property - Extension Type
The property for the extension cards can be specified.
KX-T7250 Transfer/Hold Key Mode
Selects whether the control signals sent by the Transfer and Hold buttons on
KX-T7250 PTs are reversed or
not.
Value Range
Mode 1: Does not switch the control signals
Mode 2: Switches the control signals
Maintenance Console Location
3.23 [1-1] Slot—Card Property - Extension Type
Programming Manual References
None
Feature Guide References
None
SLT Pulse Dial Mode
Selects the type of pulse dial transmission appropriate to your area.
Value Range
Normal, Sweden
, New Zealand
Maintenance Console Location
3.23 [1-1] Slot—Card Property - Extension Type
Programming Manual References
None
Feature Guide References
None
SLT Off Hook Time
Specifies the minimum length that a pulse dial sent from an SLT must be for the PBX to recognise it as an
off-hook signal.
Value Range
8 ´ n (n=3–255) ms
PC Programming Manual 229
3.23 [1-1] Slot—Card Property - Extension Type

Panasonic KX-NCP500 Specifications

General

VoIP Support	Yes
Operating System	Proprietary
Type	Hybrid IP-PBX
VoIP Codecs	G.711, G.729A
Protocols	SIP, H.323
Operating Temperature	0°C to 40°C
Analog Extensions	Yes
IP Extensions	Yes
Power Supply	AC 100-240 V, 50/60 Hz
SIP Trunks	Yes
Wireless (DECT) Extensions	Yes, with optional module
Weight	4.0 kg
Humidity	20% to 80% (non-condensing)