2.6.17 Utility—CS Status Monitor
This utility monitors the status of CSs. CSs receive data from other CSs that they are currently synchronised
with. Current Sync CS information is displayed for IP-CSs that are in
INS status.
This option is only available at Installer level.
The displayed items for the Current Sync CS of each CS are as follows:
Item Description
CS Type Type of CS that each CS is currently synchronised with.
Slot Type (for KX-NCP500/
KX-NCP1000/KX-TDE100
/
KX-TDE200)/
Shelf (for KX-TDE600)
Slot type (shelf) of the CS that each CS is currently synchronised with.
Slot Slot number of the CS that each CS is currently synchronised with.
Port Port number of the CS that each CS is currently synchronised with.
CS / Repeater Indicates whether the CS that each CS is currently synchronised with is a
CS or Repeater.
CS Name Name of the CS that each CS is currently synchronised with.
CS ID 12-digit ID number of the CS that each CS is currently synchronised with.
Monitored Value Monitored value (dBm) of the CS that each CS is currently synchronised
with.
Monitored Level Monitored level (signal strength level) of the CS that each CS is currently
synchronised with.
To monitor the status of CSs
1. From the Utility menu, select CS Status Monitor.
2. From the Interval Timer drop-down list, select the number of seconds between each automatic screen
refresh.
3. If you want to save the CS status monitor information, click Capture.
a. Create a file for saving the data.
b. Click Start.
c. Click Close.
4. Click Start to begin monitoring.
Monitoring will be performed and the screen will refresh according to the interval specified.
To refresh the screen manually at any time, click Refresh.
5. Click Stop to end monitoring.
6. If
you started to save the CS status monitor information in step 3, click Capture, then click Stop to record
the information to the specified file.
7. Click Close to return to the main screen.
PC Programming Manual 89
2.6.17 Utility—CS Status Monitor
To Next Page
Loading...
