Panasonic KX-NCP500 - Manager Features

• 6.17 [4-3] DSS Console— Type
• 13.1 [11-1] Main
– SMDR— Print Information—Error Log
– Maintenance— Local Alarm Display—Extension 1, Extension 2
– Maintenance— Daily Test Start Time—Set
– Maintenance— Daily Test Start Time—Hour
– Maintenance— Daily Test Start Time—Minute
Feature Guide References
2.4.3 Local Alarm Information
Log-in/Log-out
• 4.9 [2-6-1] Numbering Plan—Main—Features
– Log-in / Log-out
– Not Ready (Manual Wrap-up) Mode On / Off
• 5.13 [3-5-1] Incoming Call Distribution Group
—Group Settings—Miscellaneous
–
No. of Unanswered Calls for Automatic Log-out
– Last Extension Log-out
• 5.14 [3-5-1] Incoming Call Distribution Group
—Group Settings—Member List—
Wrap-up Timer
• 5.16 [3-5-3] Incoming Call Distribution Group
—Miscellaneous—
Options—Wrap-up Timer based on
• 6.1 [4-1-1] Wired Extension—Extension Settings
—Option 8—
Wrap-up Timer
• 6.5 [4-1-4] Wired Extension—Flexible Button
– Type
– Parameter Selection (for Log-in/Log-out)
– Extension Number (for Log-in/Log-out)
• 6.10 [4-2-1] Portable Station—Extension Settings
—Option 8—
Wrap-up Timer
• 6.13 [4-2-3] Portable Station—Flexible Button
– Type
– Parameter Selection (for Log-in/Log-out)
– Extension Number (for Log-in/Log-out)
• 6.17 [4-3] DSS Console
–
Type
– Parameter Selection (for Log-in/Log-out)
– Extension Number (for Log-in/Log-out)
• 13.1 [11-1] Main—SMDR— Print Information—Log-in / Log-out
Feature Guide References
1.2.2.7 Log-in/Log-out
Malicious Call Identification (MCID)
• 4.9 [2-6-1] Numbering Plan
—Main—Features—
MCID
Feature Guide References
1.21.1.9 Malicious Call Identification (MCID)
Manager Features
• 4.12 [2-7-1] Class of Service—COS Settings—Manager
—
Manager
• 13.1 [11-1] Main—Password— Manager Password - PT Programming—Prog *1
Feature Guide References
PC Programming Manual 999
Feature Programming References