Panasonic KX-NCP500 - Slt Mw Mode (Kx-Tde Series Only)

Programming Manual References
None
Feature Guide References
None
Extension Caller ID Sending
Enables the extension to send Caller ID information to an SLT.
Value Range
Disable, Enable
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
Incoming Call Wait Timer for Extension Caller ID
Specifies the length of time that the ringing for a call is delayed when the call follows immediately after the
previous unanswered call. When receiving two calls in quick succession (e.g., when a call waiting in a queue
is
directed to an extension immediately after the previous unanswered call stops ringing), some SLTs require
a pause, after the first call stops ringing, to receive the second call’s Caller ID information.
Value Range
0–15 s
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
SLT MW Mode (KX-TDE series only)
Enables the use of the Message Waiting Lamp on an SLT extension connected to the extension port.
704 PC Programming Manual
6.1 [4-1-1] Wired Extension—Extension Settings