Value Range
Disable, MW-Lamp
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Guide References
1.19.1 Message Waiting
Wrap-up Timer
Specifies
the length of time that must pass after completing a call before an extension will accept another call
when logged in as a member of an Incoming Call Distribution Group.
This timer is used when "
Options—Wrap-up Timer based on" is set to "Extension" in 5.16 [3-5-3]
Incoming Call Distribution Group
—Miscellaneous.
Value Range
0–3000 s
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
5.14 [3-5-1] Incoming Call Distribution Group—Group Settings—Member List—
Wrap-up Timer
5.16 [3-5-3] Incoming Call Distribution Group
—Miscellaneous—
Options—Wrap-up Timer based on
Feature Guide References
1.2.2.7 Log-in/Log-out
Option 9
Extension Number
Specifies the extension number of the extension.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
PC Programming Manual 705
6.1 [4-1-1] Wired Extension—Extension Settings
To Next Page
Loading...
