Panasonic KX-NCP500 - Transfer to Busy Extension W;O Bss Operation

Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings
—Main—
COS
6.3 [4-1-2] Wired Extension—FWD/DND
6.10 [4-2-1] Portable Station—Extension Settings
—Main—
COS
6.12 [4-2-2] Portable Station—FWD/DND
Feature Guide References
1.3.1.3 Do Not Disturb (DND)
OHCA / Whisper OHCA
Enables
using OHCA/Whisper OHCA as a method of second call notification by entering the feature number.
Value Range
Disable, Enable
Maintenance Console Location
4.12 [2-7-1] Class of Service—COS Settings
Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings—Main—
COS
6.10 [4-2-1] Portable Station—Extension Settings
—Main—
COS
Feature Guide References
1.8.4 Second Call Notification to Busy Extension
1.8.4.3 Off-hook Call Announcement (OHCA)
1.8.4.4 Whisper OHCA
Transfer to busy Extension w/o BSS Operation
Enables a transferred call to be queued when the transfer destination is busy.
Value Range
Disable:
The call is not transferred. (If the transfer destination has enabled the call waiting notification feature,
it is possible to inform the destination about the call transfer.)
Enable: The transferred call is queued for the time period specified in
Recall—Transfer
Recall in 4.5 [2-3]
Timers & Counters.
Maintenance Console Location
4.12 [2-7-1] Class of Service—COS Settings
Programming Manual References
4.5 [2-3] Timers & Counters—
Recall—Transfer Recall
PC Programming Manual 539
4.12 [2-7-1] Class of Service—COS Settings