8.6 [6-6] Tenant
A maximum of 8 (with the KX-NCP500/KX-NCP1000
/KX-TDE100/KX-TDE200) or 32 (with the KX-TDE600)
tenants can share the PBX. Each tenant is composed of specified extension user groups. The PBX offers each
tenant its own Time Table and system resources.
To assign extensions as operators easily, click Extension No. Setting (see 2.1.6 Extension Number
Setting).
Music On Hold
Specifies the audio source to be used for Music on Hold.
Value Range
For KX-NCP series:
Same as System Setting, BGM, BGM2, BGM3,
BGM4, BGM5, BGM6, BGM7, Tone
For KX-TDE series:
Same as System Setting, BGM, BGM2, BGM3, BGM4, BGM5, BGM6, BGM7, BGM8, Tone
Maintenance Console Location
8.6 [6-6] Tenant
Programming Manual References
4.4 [2-2] Operator & BGM
Feature Guide References
1.13.4 Music on Hold
2.2.3 Tenant Service
Operator (Extension Number)
Specifies the extension number or the floating extension number of an incoming call distribution group to be
designated as the tenant operator. When this parameter is left unspecified, the PBX operator serves as the
tenant operator.
Value Range
100–699
Maintenance Console Location
8.6 [6-6] Tenant
Programming Manual References
4.4 [2-2] Operator & BGM
Feature Guide References
2.2.3 Tenant Service
PC Programming Manual 857
8.6 [6-6] Tenant
To Next Page
Loading...
