Panasonic KX-NCP500 Programming Manual

3.13 [1-1] Slot—Shelf
Property - Virtual IP Gateway—
Hunt Pattern
The related settings of hunt patterns can be programmed. The hunt pattern determines how to route incoming
calls through virtual IP trunks to the PBX.
A maximum of 32 hunt patterns can be programmed.
Hunt Pattern 1–16
Leading Number
Specifies the leading digits of dialled numbers by which to determine the call distribution port group to direct
incoming calls.
Value Range
Max. 30 digits (consisting of 0–
9)
Maintenance Console Location
3.13 [1-1] Slot—Shelf Property - Virtual IP Gateway—Hunt Pattern
Programming Manual References
None
Feature Guide References
None
Call Distribution Port Group—1st–16th
Specifies the number of the call distribution port group to which incoming calls are directed in priority.
Value Range
For 1st:
CDPG1–CDPG16
For 2nd–16th:
None, CDPG1–CDPG16
Maintenance Console Location
3.13 [1-1] Slot—Shelf Property - Virtual IP Gateway—Hunt Pattern
Programming Manual References
3.7 [1-1] Slot—Port Property - Virtual IP Gateway Port—
Call Distribution Port Group
Feature Guide References
1.30.2.3 Call Distribution Port Group
PC Programming Manual 185
3.13 [1-1] Slot—Shelf Property - Virtual IP Gateway—Hunt Pattern

Panasonic KX-NCP500 Specifications

General

VoIP Support	Yes
Operating System	Proprietary
Type	Hybrid IP-PBX
VoIP Codecs	G.711, G.729A
Protocols	SIP, H.323
Operating Temperature	0°C to 40°C
Analog Extensions	Yes
IP Extensions	Yes
Power Supply	AC 100-240 V, 50/60 Hz
SIP Trunks	Yes
Wireless (DECT) Extensions	Yes, with optional module
Weight	4.0 kg
Humidity	20% to 80% (non-condensing)