Panasonic KX-NCP500 - 1-1] Slot-Port Property - LCO Port

3.30 [1-1] Slot—Port Property - LCO Port
Various settings can be programmed for each analogue trunk port.
To change the status of ports, click Command.
Shelf (KX-TDE600 only)
Indicates the shelf position (reference only).
Value Range
Shelf number
Maintenance Console Location
3.30 [1-1] Slot—Port Property - LCO Port
Programming Manual References
None
Feature Guide References
None
Slot
Indicates the slot position (reference only).
Value Range
Slot number
Maintenance Console Location
3.30 [1-1] Slot—Port Property - LCO Port
Programming Manual References
None
Feature Guide References
None
Port
Indicates the port number (reference only).
Value Range
Port number
262 PC Programming Manual
3.30 [1-1] Slot—Port Property - LCO Port