Overlap—Inter-digit Timer (T302-2)
Specifies the length of time within which subsequent digits of a dial number must be dialled.
Value Range
1–10 s
Maintenance Console Location
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Programming Manual References
None
Feature Guide References
None
Overlap—Dial End Code
Specifies the delimiter code to be used to signal the end of a dialled number.
Value Range
0–9, #, *
Maintenance Console Location
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Programming Manual References
None
Feature Guide References
None
Incoming Call
Voice Activity Detection for G.711
Enables
the use of the Voice Activity Detection feature for the G.711 codec. This feature conserves bandwidth
by detecting silent periods during a call and suppressing the packets of silence from being sent to the network.
Value Range
Disable, Enable
Maintenance Console Location
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
162 PC Programming Manual
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
To Next Page
Loading...
