Panasonic KX-NCP500 - Page 130

Jitter Compensation Operation for G.729A
Enables the use of a jitter buffer feature for communications using the G.729A codec.
Value Range
Disable, Enable
Maintenance Console Location
3.4
[1-1] Slot—Card Property - IPCMPR (for KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200)/IPCEMPR
(for KX-TDE600)
Programming Manual References
None
Feature Guide References
None
Jitter Buffer Delay Min. for Voice
Specifies the minimum size of the jitter buffer for voice communications.
Value Range
0–200 ms
Maintenance Console Location
3.4
[1-1] Slot—Card Property - IPCMPR (for KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200)/IPCEMPR
(for KX-TDE600)
Programming Manual References
None
Feature Guide References
None
Jitter Buffer Delay Max. for Voice
Specifies the maximum size of the jitter buffer for voice communications.
Value Range
0–200 ms
Maintenance Console Location
3.4
[1-1] Slot—Card Property - IPCMPR (for KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200)/IPCEMPR
(for KX-TDE600)
130 PC Programming Manual
3.4 [1-1] Slot—Card Property - IPCMPR (for KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200)/IPCEMPR (for
KX-TDE600)