Panasonic KX-NCP500 - Page 181

Value Range
Disable, Enable
Maintenance Console Location
3.11 [1-1] Slot—Shelf Property - Virtual IP Gateway—GW Settings
Programming Manual References
None
Feature Guide References
None
FAX Detection Ability
Enables
the use of the FAX Detection Ability feature. Since fax signals using a codec other than G.711 cannot
be received accurately at the destination, this feature automatically switches the codec to G.711 to enable
end-to-end fax signal relay over the network.
Value Range
Disable, Enable
Maintenance Console Location
3.11 [1-1] Slot—Shelf Property - Virtual IP Gateway—GW Settings
Programming Manual References
3.11 [1-1] Slot—Shelf Property - Virtual IP Gateway—GW Settings—Option 1—
IP Codec Priority—1st,
2nd,
3rd
Feature Guide References
None
DTMF
Specifies the method to transport DTMF tones.
Value Range
Inband, Outband (RFC2833), Outband (H.245)
Maintenance Console Location
3.11 [1-1] Slot—Shelf Property - Virtual IP Gateway—GW Settings
Programming Manual References
None
PC Programming Manual 181
3.11 [1-1] Slot—Shelf Property - Virtual IP Gateway—GW Settings