Panasonic KX-NCP500 - Page 20

PBX Web Manager
It
is possible to use a PC with the Maintenance Console (PBX Unified PC Maintenance Console) installed, as
a Web server. This allows users to configure the PBX via a Web browser on a local client, or a remote PC
through the Internet.
PBX
Server
Client
Remote PC
IP Network
If Maintenance Console is installed on the client PC, a Web server is not necessary.
PBX
Server/Client
Accessing PBX Web Manager
PBX
Web Manager can be enabled during the installation of the Maintenance Console. It can also be enabled
in Options.
Note
• When
starting the Maintenance Console, if there is less than 80 MB of available memory, this feature
is automatically disabled.
• Only one user can access Maintenance Console or PBX Web Manager at any given time.
To start PBX Web Manager:
1. If the PC is not the Web server:
Launch a Web browsing application and enter the
following URL:
"http://xxx:8181/INDEX.ASPX"
’xxx’ should be replaced with the server
’s IP address.
If the PC is the Web server:
Double-click the PBX Web Manager icon in the system
tray(
).
20 PC Programming Manual
1.2.1 Installing and Starting the Maintenance Console