Maintenance Console Location
3.18 [1-1] Slot—Port Property - Virtual SIP Extension Port
Programming Manual References
None
Feature Guide References
1.31.2 SIP (Session Initiation Protocol) Extension
Password
Specifies
the password used for registering a SIP Extension to the PBX. While it is possible to enter a password
manually for each SIP Extension, you can copy Extension Number to Password clicking Copy to button. This
parameter can only be modified when the virtual SIP extension port is set to OUS.
Value Range
3–16 characters (consisting of 0–9, a–z, A–Z)
Maintenance Console Location
3.18 [1-1] Slot—Port Property - Virtual SIP Extension Port
Programming Manual References
None
Feature Guide References
1.31.2 SIP (Session Initiation Protocol) Extension
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
• Click the desired cell in the column.
• Select the desired cell in the column, and then click Command.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
3.18 [1-1] Slot—Port Property - Virtual SIP Extension Port
Programming Manual References
None
208 PC Programming Manual
3.18 [1-1] Slot—Port Property - Virtual SIP Extension Port
To Next Page
Loading...
