Programming Manual References
None
Feature Guide References
None
Resending Time Out (PTAP)
Specifies the length of time after which the PBX terminates resending PTAP (Panasonic Telephony
Administration Protocol) data.
To change the value displayed here, click Common Settings and set the desired value.
Value Range
150–240 s
Maintenance Console Location
3.20 [1-1] Slot—Card Property - Virtual IPCS
Programming Manual References
None
Feature Guide References
None
First Resending Time (MGCP)
Specifies the length of time that the PBX waits before starting to resend MGCP (Media Gateway Control
Protocol) data.
To change the value displayed here, click Common Settings and set the desired value.
Value Range
500 ´ n (n=1–8) ms
Maintenance Console Location
3.20 [1-1] Slot—Card Property - Virtual IPCS
Programming Manual References
None
Feature Guide References
None
216 PC Programming Manual
3.20 [1-1] Slot—Card Property - Virtual IPCS
To Next Page
Loading...
