Setting Values Explanation
Baud Rate (bps) 2400, 4800, 9600, 19200,
38400, 57600, 115200
Specify the speed of data transmission.
Connection Settings for Modem
Setting Values Explanation
Dial Number 1-9, 0, *, #, -, "," [comma],
T, P, W
Enter the telephone number to be dialled to access the
PBX.
T: Converts the Dial Type from Pulse to Tone.
"," [comma], P, W: Inserts a pause.
Dial Type Auto(Tone), Auto(Pulse),
Manual
Specify the outgoing dialling method.
If Manual is chosen, dialling must be done with a
connected telephone.
Comment Max. 40 characters Enter a comment to identify the set of values.
Port COMx Specify the number of the COM port assigned to the
PC’s modem interface.
Only available COM ports will be displayed.
Baud Rate (bps) 1200, 2400, 4800, 9600,
19200, 38400
Specify the speed of data transmission.
Modem Initialise – Enter the modem initialise command, and click
Initialise to send the command to the modem.
For more details, refer to your modem’s instruction
manual.
Connection Settings for LAN
Setting Values Explanation
IP Address 1.0.0.0–223.255.255.255 Specify the IP address of the PBX on the LAN. Enter
the same IP address that was input in IP Address for
IPCMPR Card (for KX-NCP500/KX-NCP1000
/
KX-TDE100/KX-TDE200)/IP Address for IPCEMPR
Card (for KX-TDE600) of 3.4 [1-1] Slot—Card
Property - IPCMPR (for KX-NCP500/KX-NCP1000/
KX-TDE100/KX-TDE200)/IPCEMPR (for
KX-TDE600).
It is also possible to search for the IP address by
clicking Search.
Port Number 1–65535 Specify the port number used to access the PBX via
LAN. Enter the same port number that was input in
Maintenance Port Number of 3.4 [1-1] Slot—Card
Property - IPCMPR (for KX-NCP500/KX-NCP1000/
KX-TDE100/KX-TDE200)/IPCEMPR (for
KX-TDE600).
PC Programming Manual 25
2.1.1 Starting Maintenance Console and Software Modes
To Next Page
Loading...
