Panasonic KX-NCP500 - Page 253

Value Range
Other, 60 %, 67 %
Maintenance Console Location
3.29 [1-1] Slot—Card Property - LCO type
Programming Manual References
3.30 [1-1] Slot—Port Property - LCO Port
Feature Guide References
None
High Speed Pulse Dial—Break Width
Specifies the maximum length of the break signal in a high speed pulse dial. High Speed Pulse Dial—
Pulse % Break on this screen determines the value that can be specified here.
Value Range
4 ´ n (n=4–18) ms
Maintenance Console Location
3.29 [1-1] Slot—Card Property - LCO type
Programming Manual References
3.30 [1-1] Slot—Port Property - LCO Port
Feature Guide References
None
High Speed Pulse Dial—Make Width
Specifies
the minimum length of the make signal in a high speed pulse dial.
High Speed Pulse Dial—
Pulse
% Break on this screen determines the value that can be specified here.
Value Range
4 ´ n (n=3–15) ms
Maintenance Console Location
3.29 [1-1] Slot—Card Property - LCO type
Programming Manual References
3.30 [1-1] Slot—Port Property - LCO Port
PC Programming Manual 253
3.29 [1-1] Slot—Card Property - LCO type