Feature Guide References
1.26.3 Call Charge Services
Pay Tone—Pay Tone Pulse - MIN
Specifies
the minimum length that a received pay tone signal must be for the PBX to recognise it as a pay tone
signal.
Value Range
8 ´ n (n=1–250) ms
Maintenance Console Location
3.29 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Guide References
1.26.3 Call Charge Services
Pay Tone—Pay Tone Pulse - MAX
Specifies
the maximum length that a received pay tone signal can be for the PBX to recognise it as a pay tone
signal.
Value Range
None, 8 ´ n (n=1–250) ms
Maintenance Console Location
3.29 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Guide References
1.26.3 Call Charge Services
Pay Tone—Pay Tone Pulse - Interval
Specifies the maximum length of time between pay tone signals.
Value Range
8 ´ n (n=1–250) ms
260 PC Programming Manual
3.29 [1-1] Slot—Card Property - LCO type
To Next Page
Loading...
