Maintenance Console Location
3.35 [1-1] Slot—Port Property - PRI Port
Programming Manual References
None
Feature Guide References
None
ISDN Outgoing Call Type
Selects the method used to send dialled digits to the network.
Value Range
En-bloc: The PBX sends all of the dialled digits at once after the extension user completes dialling. The PBX
recognises the end of dialling when (1) # is dialled, if programmed, (2) a preprogrammed telephone number
is dialled, or (3) the inter-digit timer expires.
Overlap: The PBX sends dialled digits one at a time.
Maintenance Console Location
3.35 [1-1] Slot—Port Property - PRI Port
Programming Manual References
3.1 [1-1] Slot
4.5 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone— Dial—Extension Inter-digit
4.18 [2-9] System Options—Option 2— ISDN en Bloc Dial—[#] as End of Dial for en Bloc mode
5.4 [3-1-4] Dialling Plan
Feature Guide References
1.21.1.1 Integrated Services Digital Network (ISDN)
—SUMMARY
ISDN Centrex
Enables the use of the telephone company
’s ISDN Centrex Service features.
Value Range
Disable, Enable
Maintenance Console Location
3.35 [1-1] Slot—Port Property - PRI Port
Programming Manual References
None
PC Programming Manual 317
3.35 [1-1] Slot—Port Property - PRI Port
To Next Page
Loading...
