Value Range
64 ´ n (n=1–128) ms
Maintenance Console Location
3.38 [1-1] Slot—Port Property - T1 Port
Programming Manual References
None
Feature Guide References
None
Start Signal Type
Selects the type of the start signal.
Value Range
Immediate: Sends the dialled digits to the trunk when the First Dial Timer expires.
Wink: Sends the dialled digits to the trunk when the wink signal is received.
Maintenance Console Location
3.38 [1-1] Slot—Port Property - T1 Port
Programming Manual References
None
Feature Guide References
None
Sending Caller ID to TIE
Specifies whether Caller ID information is sent when the channel type is TIE.
Value Range
Yes, No
Maintenance Console Location
3.38 [1-1] Slot—Port Property - T1 Port
Programming Manual References
None
PC Programming Manual 349
3.38 [1-1] Slot—Port Property - T1 Port
To Next Page
Loading...
