Panasonic KX-NCP500 - Page 375

Value Range
1–15
Maintenance Console Location
3.42 [1-1] Slot—Card Property - E1 type—MFC-R2 Setting 1
Programming Manual References
None
Feature Guide References
None
Group-ll Code Assignment—G-ll Code Incoming Call [1]–[15]
Specifies the destination of incoming trunk calls for each Group-ll code respectively.
Value Range
Undefined
, Subscriber, Operator, Collect Call
Maintenance Console Location
3.42 [1-1] Slot—Card Property - E1 type—MFC-R2 Setting 1
Programming Manual References
None
Feature Guide References
None
Group-ll Code Assignment—Group-ll ANI
Specifies the Group-ll ANI start code.
Value Range
1–15
Maintenance Console Location
3.42 [1-1] Slot—Card Property - E1 type—MFC-R2 Setting 1
Programming Manual References
None
PC Programming Manual 375
3.42 [1-1] Slot—Card Property - E1 type—MFC-R2 Setting 1