Pause Time
Specifies the length of a pause.
Value Range
1.5 s, 2.5 s, 3.5 s,
4.5 s
Maintenance Console Location
3.44 [1-1] Slot—Port Property - E1 Port
Programming Manual References
None
Feature Guide References
1.5.4.7 Pause Insertion
1.5.4.8 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
1.5.4.9 Special Carrier Access Code
Flash Time
Specifies the length of a flash signal.
Value Range
None, 16 ´ n (n=1–255) ms
Maintenance Console Location
3.44 [1-1] Slot—Port Property - E1 Port
Programming Manual References
None
Feature Guide References
None
Disconnect Time
Specifies the length of time after a trunk is disconnected, during which the PBX cannot seize the line.
Value Range
0.5 s, 1.5 s, 2.0 s,
4.0 s, 12.0 s
Maintenance Console Location
3.44 [1-1] Slot—Port Property - E1 Port
PC Programming Manual 393
3.44 [1-1] Slot—Port Property - E1 Port
To Next Page
Loading...
