Sending Caller ID to CO
Specifies whether Caller ID information is sent to an analogue trunk.
Value Range
No, Yes
Maintenance Console Location
3.50 [1-1] Slot—Port Property - DID Port (KX-TDE series only)
Programming Manual References
None
Feature Guide References
None
Receiving Caller ID from CO
Specifies whether Caller ID information is received from an analogue trunk.
Value Range
No, Yes
Maintenance Console Location
3.50 [1-1] Slot—Port Property - DID Port (KX-TDE series only)
Programming Manual References
None
Feature Guide References
None
Send Ringback Tone to Outside Caller
Enables the PBX to send a ringback tone to an outside caller when the network cannot send the tone.
Value Range
Disable, Enable
Maintenance Console Location
3.50 [1-1] Slot—Port Property - DID Port (KX-TDE series only)
Programming Manual References
None
PC Programming Manual 423
3.50 [1-1] Slot—Port Property - DID Port (KX-TDE series only)
To Next Page
Loading...
