Panasonic KX-NCP500 - Page 430

Maintenance Console Location
3.53 [1-1] Slot—Port Property - IP-GW Port (KX-TDE series only)
Programming Manual References
None
Feature Guide References
None
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
• Click the desired cell in the column.
• Select the desired cell in the column, and then click Command.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
3.53 [1-1] Slot—Port Property - IP-GW Port (KX-TDE series only)
Programming Manual References
3.54 [1-1] Slot—Port Property - IP-GW Port—Connection Command (KX-TDE series only)
Feature Guide References
None
430 PC Programming Manual
3.53 [1-1] Slot—Port Property - IP-GW Port (KX-TDE series only)