Trunk Group Access
Specifies the feature number used to make a trunk call using an idle trunk from a certain trunk group.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan
—Main
Programming Manual References
12.1 [10-1] CO Line Settings
Feature Guide References
None
TIE Line Access
Specifies the feature number used to make a TIE line call.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan
—Main
Programming Manual References
11.1 [9-1] TIE Table
Feature Guide References
1.30.1 TIE Line Service
Redial
Specifies the feature number used to redial the last number dialled.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan
—Main
Programming Manual References
None
PC Programming Manual 499
4.9 [2-6-1] Numbering Plan—Main
To Next Page
Loading...
