3rd Party CTI—System status retry counter
Specifies
the number of times that the alive check is repeated for Third Party Call Control CTI. When the alive
check has been attempted the programmed number of times without success, the PBX assumes that the logical
connection with the CTI application software has been lost.
Value Range
0–10
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.32.1 Computer Telephony Integration (CTI)
3rd Party CTI—CDR retry interval timer
Specifies
the length of time until the alive check of CDR is retried when no response is received, for Third Party
Call Control CTI.
Value Range
0–60 s
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.32.1 Computer Telephony Integration (CTI)
3rd Party CTI—CDR retry counter
Specifies
the number of times that the alive check of CDR is repeated for Third Party Call Control CTI. When
the alive check has been attempted the programmed number times, the association is released automatically.
Value Range
0–10
Maintenance Console Location
4.18 [2-9] System Options
584 PC Programming Manual
4.18 [2-9] System Options
To Next Page
Loading...
