6.12 [4-2-2] Portable Station—FWD/DND
Feature Guide References
1.2.2.2 Group Call Distribution
DND Mode
Specifies whether extensions in DND mode ring when a call is received at the incoming call distribution group.
Value Range
No Ring, Ring
Maintenance Console Location
5.13 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
6.3 [4-1-2] Wired Extension—FWD/DND
6.12 [4-2-2] Portable Station—FWD/DND
Feature Guide References
1.2.2.2 Group Call Distribution
Tenant Number
Specifies the tenant to which the incoming call distribution group belongs, to determine the Time Table and
the audio source for the group. (The tenant number corresponds to the Time Table number.)
Value Range
For KX-NCP500/KX-NCP1000
/KX-TDE100/KX-TDE200:
1–8
For KX-TDE600:
1–32
Maintenance Console Location
5.13 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
4.4 [2-2] Operator & BGM
4.6 [2-4] Week Table
8.6 [6-6] Tenant—
Music On Hold
Feature Guide References
1.13.4 Music on Hold
2.2.3 Tenant Service
626 PC Programming Manual
5.13 [3-5-1] Incoming Call Distribution Group—Group Settings
To Next Page
Loading...
